Quoting for steel pipe fittings
Quotes your estimators can defend.
Configure a bend, tee or reducer, see the steel, welding and lining behind every price, and send a branded PDF quote in minutes. Not an afternoon in a spreadsheet.
Mitred bend 90° · DN 600
Ø610 × 8 mm SABS 719 · 5 segments · flanged SABS 1123 1000/3 both ends
Unit price, R21,429.60
| The working, per unit | Qty | Rate | R |
|---|---|---|---|
| Pipe, 610 mm OD | 2.440 m | 2,480.00 | 6,051.20 |
| Epoxy lining and coating, 610 mm pipe | 9.3519 m² | 185.00 | 1,730.10 |
| 4 mitre welds | 15.331 m | 95.00 | 1,456.44 |
| End A: flange, weld and coating | 1 piece | 3,318.02 | |
| End B: flange, weld and coating | 1 piece | 3,318.02 | |
| Cost | 15,873.78 | ||
| Margin, 35% | 5,555.82 | ||
| Unit price | 21,429.60 | ||
From drawing to quote in three steps
- 1
Configure the fitting
Pick a bend, tee or reducer, a size and its ends. Standard dimensions for SABS 62, SABS 719 and ASTM A106 pipe fill in, so you only type what's special.
- 2
Check every number
The price breaks down into pipe, welding, lining, coating and each flange, with the quantity and rate behind every line. Adjust the margin and watch the total.
- 3
Send a quote that wins
A clean PDF in your company's brand, with your terms and no internal costs. Once it's sent, it's locked to the day's rates.
Built for the fittings you make
Pipewright starts with fabricated steel water fittings: the bends, tees and reducers on every bulk water main. Pipe sizes, standard lengths and flanges come built in, and you can add your own.
Mitred bends
Medium and long radius, 2 to 7 segments
Tees
Equal and unequal, with branch sizes by run
Concentric reducers
Plain or with a small-end extension
Eccentric reducers
Priced and coated as a cone
Flanged ends
SABS 1123, BS 4504 and BS 10 flanges, couplings and puddle flanges
Laterals and end caps
Next on the list
Tested against 13,000 real quotes
Before it priced anything new, the Pipewright engine re-priced 13,683 quote lines from a working fittings shop: pipe, mitred bends, tees, puddle pipes, bought-in bends and reducers. 98.7% match to the cent. The rest are a cent out where the old system rounded half cents inconsistently.
Your rates, your rules
Steel by the metre, welding by the weld metre, lining and coating by the square metre or kilogram. Each rate shows when it was last changed, and by whom.
Sent means locked
A sent quote keeps the rates of the day it was sent. Change a steel price tomorrow and only your drafts move.
Units are never ambiguous
Every input and value shows its unit. Work in millimetres or inches; the drawing and the quote always agree.
Looking for three to five design partners
Fabricators who quote steel fittings every week. You get Pipewright at half price for the first year and a say in what it does next; we get your honest feedback.